|
DS-32C AO | Technical Specifications |
| |
|
|
Technology |
<Back |
|
|
- CMOS components for low power
consumption and extensive use of surface mount components.
- Employing In-System-Programming
technology for EEPROM and EPLD
- Rear accessible termination for ease of
circuit board replacement
|
|
Power Requirement |
|
|
- Isolated unregulated 12VDC (1/2 A) or 24VDC (1/4 A).
|
|
On-Board Power Supplies |
|
|
- Switching mode, +5 VDC for digital electronics, isolated
-15VDC and +15VDC for Analog Output electronics.
|
|
Board Status Indicator |
|
|
- Control / Integrity check indicator.
- Power On check indicator.
|
|
Data and Address Bus |
|
|
- 26-pin ribbon cable connection daisy-chained to a
maximum of 14 AI/AO board combinations.
|
|
Analog Outputs |
|
|
- Number of Outputs: 8 Analog Outputs, with one shield
for every 2 points.
- Voltage output: 0-5.0 VDC, 0-10.0 VDC.
- Current output: 4-20mA.
- Resolution: 12 bit.
|
|
Operating Environment |
|
|
- Temperature Range: -40 to +85 degrees Celsius.
Humidity: < 95%, non-condensing.
|
|
Physical Dimensions |
|
|
- 19.0 x 3.5 inches for 19" standard rack mount or panel
mount (wall-mount solution).
|
|
|
<Back to DS-32C AO
|
